Sikafloor 263SL full 33kg kit

Description

Sikafloor-263 SL is a 2-component solvent free pigmented epoxy resin based flooring system. The material can be classified into three systems as a smooth self levelling floor topping system.

 

Uses and advantages

USE

• Food processing industry
• Chemical/pharmaceutical industry
• Power stations
• Plastics industry
• Laboratories and rooms subject to radiation
• Clean rooms, exhibition halls and showrooms
• Demonstration areas and training rooms
• Washrooms, cloakrooms

For use on mineral-based substrates such as:

• Concrete
• Mortar
• Stone
• Epoxy Modified Mortars (EpoCem)

• High mechanical properties
• Good abrasion resistance
• Good chemical resistance
• High durability
• Coloured
• Solvent free
• Jointless
• Easy and fast to apply
• Easily cleaned and maintained
• Waterproof

Colours

Standard colours (available now)
Light Grey RAL 7035, Window Grey RAL 7040, Dusty Grey RAL 7037, Koala Grey N45, Stone Grey RAL 7030, Traffic Black RAL 9017

Specialty Colours (available on request only)
Signal White RAL 9003, Dahlia Yellow RAL 1033, Red Orange RAL 2001, Ruby Red RAL 3003, Oxide Red RAL 3009, Pastel Blue RAL 5024, Sky Blue RAL 5015, Signal Blue RAL 5005, Grass Green RAL 6001, Reed Green RAL 6013, Slate Grey RAL 7015, Anthacite Grey RAL 7016, Grey White RAL 9002, Pebble Grey RAL 7032, Beige RAL 1001, Grey Beige 1019

 

Packaging

Propotioned 33kg 
Part A 13.09 kg
Part B 3.70 kg
Part C (filler) 15 kg*
Pigment Pack 1.15 kg
* Can vary between 15 – 18 kg depending on flow requirements

 

 

Data Sheets

PDS  |  SDS Part A  |  SDS Part B  |  SDS Part C  |  SDS Pigment Paste

https://aus.sika.com/en/46017/flooring/resin-flooring/epoxy-flooring-productssystems/sikafloor-263-sl.html

 

 

Disclaimer

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.